Vent venligst...
Varen er tilføjet indkøbskurven. Se indkøbskurv her

Atlona 4K/UHD 100m HDBaseT TX ONLY with Ethernet, Control and PoE

Forsiden Billede HDMI Forlængere Atlona 4K/UHD 100m HDBaseT TX ONLY with Ethernet, Control and PoE
Atlona 4K/UHD 100m HDBaseT TX ONLY with Ethernet, Control and PoE (AT-UHD-EX-100CE-TX)

Atlona 4K/UHD 100m HDBaseT TX ONLY with Ethernet, Control and PoE

Varenr.:
AT-UHD-EX-100CE-TX
  • Type Video Extender / Modtager

Mette og Morten sidder klar til at hjælpe dig, hvis du har spørgsmål. 

Mette Malling+45 3155 8641
Morten Jensen+45 3178 0303

The AT-UHD-EX-100CE-TX is compatible with the AT-UHD-EX-100CE-RX receiver, as well as Atlona switchers and matrix switchers with HDBaseT inputs. See below for a list of compatible products. This transmitter is also ideal for extending AV and control to displays with HDBaseT inputs.

The Atlona AT-UHD-EX-100CE-TX is an HDBaseT transmitter for HDMI transmission up to 330 feet (100 meters) over category cable with Ethernet pass through, plus RS-232 and IR control. Designed to work with HDBaseT inputs on switchers and projectors, this extender transmits video signals up to 4K/UHD @ 60Hz with embedded multi-channel audio. Additionally, the transmitter extends Ethernet, RS-232, and 12 volt-based IR control commands. The AT-UHD-EX-100CE-TX is HDCP 2.2 compliant and supports EDID communication. The transmitter features a quarter rack width metal enclosure for easy rack mounting with rear panel I/O ports for uncluttered wire management. This PSE (Power Sourcing Equipment) device is externally powered, includes a desktop power supply and provides Power over Ethernet for compatible receiving devices. The AT-UHD-EX-100CE-TX is certified by the HDBaseT Alliance.

This HDBaseT Class A transmitter is designed to support the growing number of displays and video projectors in the commercial market with HDBaseT inputs. Built-in Ethernet and bi-directional control signal extension eliminates the need for additional cabling from switcher to the display or remote input device. Installer-friendly features include: a rack-mountable form factor that allows four transmitters to share a single, 1U rack tray; power chaining to allow multiple sets to be powered from one power supply; and a front mounted USB port for easy firmware updates.

- 4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling
- HDCP 2.2 compliant
- Supports 4K HDR10 @ 24 Hz (4:2:0 chroma subsampling, 10-bit color)
- HDBaseTTM transmitter for HDMI®, Ethernet, power, and control up to 330 feet (100 meters)
- Local AC powering – PoE (Power over Ethernet) source
- Transmits RS-232, IR, CEC, and Ethernet control signals over HDBaseT
- Multi-channel audio compliant for all PCM, Dolby®, and DTS® formats

Funktioner

TypeAV sender
Maks. opløsning4096 x 2160 pixel
Typer kabel, der understøttesCat5e,Cat6,Cat6a,Cat7
Maksimal overførselsafstand100 m
Lyd-output kanaler7.1 kanaler
Understøttede videofunktioner480i,480p,576i,576p,720p,1080i,1080p
Understøttede grafikopløsninger640 x 480 (VGA),800 x 600 (SVGA),1024 x 768 (XGA),1280 x 1024 (SXGA),1280 x 768 (WXGA),1280 x 800 (WXGA),1360 x 768 (WXGA),1366 х 768,1400 x 1050 (SXGA+),1440 x 900 (WXGA+),1600 x 1200 (UXGA),1600 x 900,1680 x 1050 (WSXGA+),1920 x 1080 (HD 1080),1920 x 1200 (WUXGA),2560 x 1600 (WQXGA),2560 x 2048,3840 x 2160,4096 x 2160
Båndbredde10,2 Gbit/sek.
HDCP Yes
Farvedybde12 Bit
Farve på produktSort
Overholder RoHS Yes
GodkendelseCE, FCC

Porte & Grænseflader

ForbindelsesteknologiLedningsført
Ethernet LAN Yes
RJ-45 indgangs-porte1
HDBaseT port Yes
HDMI indgående1
RS-232 indgangsporte1
Fjernbetjening (IR) indgang1
Fjernbetjening (IR) udgang1

Strømstyring

AC indgangsspænding100-240 V
AC frekvens50 - 60 Hz
Udgangsstrøm0,83 A
Driftsspænding (modtager)48 V
Strømforbrug (normal)12 W

Driftsbetingelser

Driftstemperatur (T-T)0 - 50 °C
Lagringstemperatur (T-T)-20 - 60 °C
Relativ luftfugtighed (H-H)20 - 90%

Vægt & størrelser

Bredde119 mm
Dybde89 mm
Højde27 mm
Vægt390 g

Tekniske detaljer

Farve Yes


Copyright © 2023 IMAGO SONAS A/S. Alle rettigheder forbeholdt.